HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Clustering
cancel
Showing results for 
Search instead for 
Did you mean: 

CR3500 change from Active/Passive to Active/Active

 
Scott Shoop
Occasional Visitor

CR3500 change from Active/Passive to Active/Active

How do you change the failover mode from Active/Passive on a Proliant CL 380?
2 REPLIES
Doug de Werd
Honored Contributor

Re: CR3500 change from Active/Passive to Active/Active

You should be able to do it with the CR3500 Config Utility.

See if this helps:

http://h200007.www2.hp.com/bc/docs/support/UCR/SupportManual/TPM_157839-004/TPM_157839-004.pdf

Thanks,
Doug
Expert in ProLiant Clusters
Scott Shoop
Occasional Visitor

Re: CR3500 change from Active/Passive to Active/Active

OK, but when I go into the CR3500 config utility in the Host Ports tab shows Active/Passive and the second controller is grayed out. Do I have to reinstall the software to configure the second controller?

Thanks,
Scott