cancel
Showing results for 
Search instead for 
Did you mean: 

Stretch Cluster

 
SOLVED
Go to solution
Erich Noller
Occasional Visitor

Stretch Cluster

Hello
we plan to go to a (stretch) Cluster with SAN on Novell 6.5 and two sides, distance between is about 1 km. One side is only for desaster recovery so both sides shuld have the same hardware. What HP-Hardware we can use ? is there any similar installation ??
thanks for quick answer

Erich
5 REPLIES
Doug de Werd
Honored Contributor
Solution

Re: Stretch Cluster

You can use the Continuous Access (CA) feature of EVA (3000 or 5000) for this. Here are a couple of links:

http://h18006.www1.hp.com/products/storage/software/conaccesseva/index.html

http://h18006.www1.hp.com/products/quickspecs/11617_div/11617_div.html

Thanks,
Doug

Expert in ProLiant Clusters
Erich Noller
Occasional Visitor

Re: Stretch Cluster

Hi Dough
thanks for your answer, i will hope the EVA 3000 will work with Novell OS. I heared a rumor it will not.

Erich
Doug de Werd
Honored Contributor

Re: Stretch Cluster

Yes it is supported. Check out the Quickspecs for the Continuous Access (CA) software for EVA, which is the enabling technology for the data replication. It clearly states support for Novell.

http://h18006.www1.hp.com/products/quickspecs/11617_div/11617_div.html

However, I might suggest that you contact a local HP Storage Specialist for detailed assistance, as these types of configurations can sometimes be tricky to set up.

You can contact the local HP pre-sales technical team in Germany at 01805-235492

Thanks,
Doug

Expert in ProLiant Clusters
Erich Noller
Occasional Visitor

Re: Stretch Cluster

Hi Doug
thanks a lot for your information. I think it will help us.

Erich
Erich Noller
Occasional Visitor

Re: Stretch Cluster

I will contact a local HP pre-sales technicant.