cpqiml.nlm on Netware 6.5 SP7, can't authenticate

[Greg W. Webster]

(This is working fine on the other 8 Netware file and print servers we have on our Network)

On all of our Netware servers, I can't clear the IML log via the web interface, so I file and clear it via the cpqiml.nlm interface. That's all fine except for one server, which won't allow me to authenticate to do the clear (as my "admin.treename" user or as my own user which has rights to the whole tree).

Two possible solutions, as I see it:
- find out where the IML is and clear it some other way (so far I've not been able to figure out where that data is stored)
- fix cpqiml.nlm so it authenticates properly

Any advice on either would be greatly appreciated!

Thanks,

Greg

[Greg W. Webster]

Solution found!

In order to do this clear, you must specify a read-write community string. It doesn't matter what it is, and you don't have to tell any other part of the system what the RW community string is, but it has to exist in order to clear the IML log.

A bit silly, in my opinion, but there it is!