Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Server Management - Remote Server Management
cancel
Showing results for 
Search instead for 
Did you mean: 

BL465c G1 iLO2 has 2 IPs

Andrew Schlafmann
Frequent Advisor

BL465c G1 iLO2 has 2 IPs

Under the address of the iLO on one of my servers in HPSIM, it lists 2 IPs. One is for the iLO of that server, the other is for an iLO of a different server. The iLO of that other server does not show up in HPSIM. Running iLO2 1.61. I tried to look around, but have found nothing so far.
1 REPLY
Andrew Schlafmann
Frequent Advisor

Re: BL465c G1 iLO2 has 2 IPs

Figured it out. iLO was retaining old IP. Reset iLO and deleted server and iLO out of HPSIM and re-added both.