Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Server Management - Remote Server Management
cancel
Showing results for 
Search instead for 
Did you mean: 

Blade enclosure discovery

Riks_2
Frequent Advisor

Blade enclosure discovery

Hi,

When I run discovery on c7000 blade enclosure, not all components are discovered...
I currently have an enclosure with 9 half height blades with 4 cisco blade switches, and 2 cisco mds switches, but only 8 blades, 1 cisco switch and 2 cisco mds switches are discovered.

I deleted all and re-run the discovery, but no luck. I accessed http:///xmldata?item=all OK, and found that cisco blade switches has the same ip address (only one) though all serial number are different...

Does anyone know why cisco network switches has the same ip address, and I can't discover one blade?

Many thanks in advance.

Regards,
Riks