HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Remote Server Management
Showing results for 
Search instead for 
Did you mean: 

Capacity ILO 1st Generation

Go to solution

Capacity ILO 1st Generation

I've an ILO card on mly HP Prolian DL380 G4. I want to know if we can have hardware state by ssh.

I wan't to find the RAID state. There is an another solution expect HP SIM?

Thanks for your help !
Rajeshwari, Hiresave
Trusted Contributor

Re: Capacity ILO 1st Generation

Please clarify as to which hardware state are you looking for ? If it is the health state of devices like fans, power supplies, etc, then they are available only with iLO2. (example: show /system1/fan1) With iLO1, you can get information on the hardware configuration of the system easily, but not the health of the hardware components.

To find the raid state, either use the ACU (Array confuguration utility) or use the F8 prompt on for Smart Array controller during system boot up.


Re: Capacity ILO 1st Generation

You answer my question. I need hard state (RAID, CPU, FAN...).