HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Remote Server Management
cancel
Showing results for 
Search instead for 
Did you mean: 

Changing the DHCP server address in iLO

 
Jared R.
Occasional Visitor

Changing the DHCP server address in iLO

I was wondering how I can change the DHCP server address in iLO. The field is currently greyed out.

iLO Firmware Version: 1.80

Thanks for your help.
1 REPLY
pratap m keshava
Trusted Contributor

Re: Changing the DHCP server address in iLO

In the Administration -> Network settings options in iLO page,
Enable DHCP: should be set to "Yes". Then all the fields related to DHCP will be enabled which you can modify. You need to apply settings which will reboot iLO and once the reboot is completed, iLO should fetch network credentials from DHCP server.
just a suggestion, not a requirement. You can upgrade the firmware to 1.89 which is latest.