1748137 Members
3693 Online
108758 Solutions
New Discussion

Configure iLO

 
hoang.tran
New Member

Configure iLO

Hi all,

I have DL380 G4 that I need to have iLO configured. I already have Advanced license for it. Do I need to have anything else besides IP/NM/etc.? Does it use any special network cable or just regular RJ45 straighthrough? Do I need any KVM over IP switch to use this? Since I can reboot the server, can I download the hpcfg util and configure it from there? Am I overlooking anything? Can someone point me to the right direction please? I've read and looked like I am required to boot the server up and press F8 to configure it. Is this true?

Thanks in advance for your help.
1 REPLY 1
KarloChacon
Honored Contributor

Re: Configure iLO

hi

to make it easy you can test with a cable from a PC and server and configure your ilo and test once you now you can configure your normally

-------
just a RJ45 cable.


this says how to do it, page 14
http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c00209014/c00209014.pdf

regards
Didn't your momma teach you to say thanks!