Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Server Management - Remote Server Management
cancel
Showing results for 
Search instead for 
Did you mean: 

Configuring ILO on BL20p through diagnostics port

Radiohead316
Occasional Visitor

Configuring ILO on BL20p through diagnostics port

Hello,

I have a BL20p G2 that I need to configure the ILO on locally. I have received the diagnostics cable to connect to the server, but I'm not sure exactly what to do from here.

Do I connect through the serial or network port? What are the steps to configure the IP's?

Thanks.
1 REPLY
Radiohead316
Occasional Visitor

Re: Configuring ILO on BL20p through diagnostics port

There is an IP address on the dongle and you connect with a straight through RJ45 cable. You must configure your network to be on the same range and subnet.

Thanks.