DL 320 G3 Share Network Port for NIC & iLO

[acartes]

If you cannot ping the iLO shared network port, network connectivity needs to be examined.

The port that you were connected to when you saw the "browser access not supported" page was the correct one. Also, you must have had an IP address at that time.

- Make sure the proper ethernet port is connected
- Check the iLO network address in RBSU and make sure you can ping this address. The address in RBSU may or may not be valid. You might want to try a static IP address.

[waiho]

I manage to ping now, when im set to share network port.. but ....... CONNECTION REFUSE!
geez...

[waiho]

I notice when i Turn off the share network port. I manage to SSH to the iLO.
But when i Turn on the Share netowrk port. I will not able to get ssh. error: Connection refuse. I suspect the service will turn off when i change it to share network port.
Do you guys have any idea to help me out.
Please.
Thanks.