Server Management - Remote Server Management
cancel
Showing results for 
Search instead for 
Did you mean: 

DL380 G3 after lights-out update to v1.89

Andy Slate
Occasional Visitor

DL380 G3 after lights-out update to v1.89

I have updated a DL380 G3 to v1.89 of lights-out firmware using the browser method. All seemed to work correctly but after lights-out restarted I could not connect to it. I rebooted the server and there was no mention of lights-out on the way up. I powered down and removed the power for a minute and tried again. Now the server will not post. All LEDs inside and out are green. When I Power on the hard disk lights come on and the floppy light then nothing. Any ideas?
1 REPLY
Andy Slate
Occasional Visitor

Re: DL380 G3 after lights-out update to v1.89

We have had the motherboard replaced so no longer a problem.