Enable ILO without reboot & How to tell if ILO enabled?

[first_1]

I have some servers that we can;t reboot and we need ILO enabled.

I've run hponcfg to program the cards and they still don't work.

I suspect that ILO may be disabled but how can I determine that?

When I look on the HP management home page, I don;t see anything that says ILO is disabled. There are a couple of items for the management processor:

Integrated Lights-Out = shows icon = green check

Embedded NEC98431 = shows icon= blue ?, status = enabled, link status = unknown

thanks

[WFHC-WI]

Is this a Windows server? If so you can check Device Manager and look at the Multifunction Adapter section for the iLO proc.

Does HPONCFG report that no ilo card was found?