Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Server Management - Remote Server Management
cancel
Showing results for 
Search instead for 
Did you mean: 

HP Itanium - ILO2 no security tab

rdasari
Occasional Contributor

HP Itanium - ILO2 no security tab

We are running HP Itanium 64bit HP-UX11.23 and ILO2. Wanted to setup ILO to send SNMP trap messages to HPSIM on disk errors. I clicked on Advanced Tab in ILO2 and don't see the security tab. Should I have to load anything else for full Admin access ?

Regards,

Ramamurthy Dasari
1 REPLY
kris rombauts
Honored Contributor

Re: HP Itanium - ILO2 no security tab

The SNMP traps for disk subsystem related issues are not configured at the iLO level, they have to be configured at the OS level with the right management or diagnostic software.

On Windows and Linux this is done by the Insight Management Agents or Server Management Agents, on HP-UX it is something simmilar that has to be loaded.


HTH

Kris