HP advisory says to update to iLO 3 1.57 or later, yet 1.55 is all that is available???

[Rob Gagnon_1]

Thanks for the quick response.  I didn't see any mention in the readme when I looked.  While I'm here would there be any odd interaction with the Blade enclosure's Onboard Administrator that I might need to worry about as well?

[Oscar A. Perez]

Since you will be running the Online Component on Linux, I don't think the OA would even notice that the iLO3 is being flashed, at least not until iLO actually reboots at the end. But, I would recommend just doing the flash on one blade at the time, just in case.

[Oscar A. Perez]

I've created a new temporally FTP site cause the other one is about to expire.

 ftp://ilo3_157:G!v3t2me@ftp.usa.hp.com