HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Remote Server Management
Showing results for 
Search instead for 
Did you mean: 

How to find out the ILO DNS Name

Ester Trincado
Occasional Visitor

How to find out the ILO DNS Name


If I do not have any more the information from the ILO2 Network settings and I like to find out from a server the ILO DNS Name, how can I do that?

Best regards
Honored Contributor

Re: How to find out the ILO DNS Name

If you have iLO IP Address just open it in browser: https://
If its first time you are going to setup then
Restart server press F8 you will get iLO screen there you can go in settings-> network and set or see the settings.

for more read this one:
Jimmy Vance

Re: How to find out the ILO DNS Name

If it hasn't been changed from default, you can look at the toe-tag on the server. If you have the utilities installed you can do "hponcfg -w ilosettings.txt" which will write out the iLO configuration settings to a file

No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!