HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Remote Server Management
Showing results for 
Search instead for 
Did you mean: 

ILO 1.92 crashes

Frequent Advisor

ILO 1.92 crashes


I have upgraded ILO Firmware to 1.92 on two DL380 G3 servers and both are experiencing similar problems.

I have gotten errors like, "integrated lights-out configuration is temporarily unavailable (1)". I have reset the ILO card by removing the 3V battery and as soon as I reconfigure the ILO to use AD authentication it just crashes/freezes/hangs.

I have tried to downgrade the firmware but not successful, even with using offline mode with firmware CD.

Any help would be appreciated?

Honored Contributor

Re: ILO 1.92 crashes

searching for this

I found there is a newer version 1.93


I had 1.92 in one of my servers and I downgraded to 1.91 with no problems using the ilo browser and .bin file

after that I upgraded to 1.93 and it is working just fine
Didn't your momma teach you to say thanks!
Frequent Advisor

Re: ILO 1.92 crashes

Thanks Karlo for the response...I did notice new firmware 1.93 but have not had a chance to test it yet.

I'm just curious, out of all the people in the forum, am I the only person that experienced this problem with 1.92 and AD authentication crashing/freezing?

I found another post where someone else experienced the same problem here: http://www.bladewatch.com/2008/05/24/hp-ilo-firmware-192-announced/?disqus_reply=6448111#comment-6448111