ILO 3 Remote Console No Video issue

[Fred_G]

Thx ! This solution works for me !

I replaced the ATI Driver by the Standard VGA and after the reboot the remote console works again.

[Upinder]

If the remote console is blank with no video or trying to authenticate and closes,

Please follow the steps below which could resolve your issue.

1. Mostly the issue here could be with the Port number - Go to Administration -> Remote Access -> Check the port number, if the port number is listed as 17990 or 12990 change that to 23 or vice versa

2. Upgrade the ILO firmware update.

3. Also make sure that that the server IP is pingable.

Regards
Upi

[IDATAMAN]

Opening ports 17990 in/outbound in Windows Firewall fixed this for me.

Windows 10 Pro 64bit, Version 1709, 16299.431

[VinnyWills · Accepted solution]

Issue resolved by removing the video driver and upgrade to video driver is required in this case ..