Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Server Management - Remote Server Management
cancel
Showing results for 
Search instead for 
Did you mean: 

ILO Configuration on DL 580 G2

Francesco25
Occasional Contributor

ILO Configuration on DL 580 G2

HI,
Can i set up IP address or view configuration of ILO without reboot a server (generally ILO is configured by F8 button after restart).
the Server is DL 580 G2 the version of ILO is 1.80 with Smart Start 7.40
Thank You
2 REPLIES
Rajeshwari, Hiresave
Trusted Contributor

Re: ILO Configuration on DL 580 G2

It is possible to configure iLO using HP Online configuration utility (hponcfg)withour a server reboot, but only if the Server is booted in Windows or Linux. The utility is available for download from HP website. It is also avaialable in the Proliant support pack. For more details refer iLO Scripting and command line resource guide.
Rajeshwari, Hiresave
Trusted Contributor

Re: ILO Configuration on DL 580 G2

When iLO is not on network, it is possible to configure iLO without a server reboot using HP Online configuration (hponcfg) utility, but only if the Server is booted in Windows or Linux. The utility is available for download from HP website. It is also avaialable in the Proliant support pack. For more details refer iLO Scripting and command line resource guide.