Server Management - Remote Server Management
cancel
Showing results for 
Search instead for 
Did you mean: 

ILO F8 option not available

Phillip Judge
Occasional Contributor

ILO F8 option not available

when some of our servers boot the option to press F8 is not available.

Any known reason for this?

DL380G3 ILO on board.

Thanks
3 REPLIES
barnett chan
Trusted Contributor

Re: ILO F8 option not available

iLO is not responding. Try removing power for a few seconds, then plug the power cable back in.
Phillip Judge
Occasional Contributor

Re: ILO F8 option not available

thanks, this worked. Do you know what causes this to happen??

Thanks

Phill
acartes
Honored Contributor

Re: ILO F8 option not available

The iLO option ROM is a program that runs on the host processor and communicates to the iLO management processor. If the iLO option ROM is unable to communicate (for numerous possible reasons), the error message is presented by the option ROM.

If the option ROM presents an error message like this, there is probably a problem with the running firmware image. Cycling the system by removing power causes the firmware to reboot.