Server Management - Remote Server Management
1748014 Members
3865 Online
108757 Solutions
New Discussion юеВ

ILO Firmware 1.89

 
Peter Scaringi
Advisor

ILO Firmware 1.89

What is the correct ILO firmware for DL360,380, & 580 servers ?

My HP SIM shows that 1.88 (cp007059) was installed but that is Japanese. HP SIM does not show a requirement for 1.89 US (cp007120). But I think this is the correct firmware for my servers.

Thanks

Claude
3 REPLIES 3
acartes
Honored Contributor

Re: ILO Firmware 1.89

The iLO support for a server is found here:
http://h18013.www1.hp.com/products/servers/management/remotemgmt/supported-servers.html

The latest iLO firmware (English) is found here (the Windows online flash component is used):
http://h18023.www1.hp.com/support/files/lights-out/us/revision/6214.html

The latest iLO 2 firmware (English) is here:
http://h18023.www1.hp.com/support/files/lights-out/us/revision/9271.html
Kevin Brown_4
Frequent Advisor

Re: ILO Firmware 1.89

My HPSIM is showing my ILO's at 1.88 Japanese as well.
I upgraded one of my servers to the US 1.89, but HPSIM is still showing it as Jananese, but now at 1.89.
Rancher
Honored Contributor

Re: ILO Firmware 1.89

Go into your Version Control Repository and delete the Japanese versions of the iLO firmware. Then run a software poll on your server and you should see the correct iLO firmware version showing up.