Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Server Management - Remote Server Management
cancel
Showing results for 
Search instead for 
Did you mean: 

ILO Port not accessible

Vipal
Contributor

ILO Port not accessible

hi...
we are having DL380 Server running LINUX. i am not able to connect ILO port through windows machine on same network. i am even not able to ping ILO Port. Please tell me, what are possible reason behind this.
1) For ping failure, i can understand that cable may be not connected properly to ILO Port or may be issue with ILO card/port

what could be other chances???
4 REPLIES
Oscar A. Perez
Honored Contributor

Re: ILO Port not accessible

What is generation of DL380 you have? This is going to tell me if you have iLO-1, iLO2 or iLO3.

If you restart the server, do you see during POST a message mentioning iLO and asking to press F8 to configure it?



__________________________________________________
If you feel this was helpful please click the KUDOS! thumb below!
Vipal
Contributor

Re: ILO Port not accessible

Hi...

We are having DL 380 g5 SERVER. ILO Version is 2.
Duncan Aynsley
Occasional Advisor

Re: ILO Port not accessible

Make sure that the switchport that your ILO is connected to is running at 10/100.

Although the on board NICs support Gig speed, the ILO doesn't.
Oscar A. Perez
Honored Contributor

Re: ILO Port not accessible

Go to the iLO2 RBSU by pressing F8 when iLO2 is announced during POST and then ensure that iLO2 NIC is set to ON instead of Shared Network Port and Transceiver Speed Autoselect is ON as well.



__________________________________________________
If you feel this was helpful please click the KUDOS! thumb below!