Server Management - Remote Server Management
1748145 Members
3598 Online
108758 Solutions
New Discussion юеВ

Re: ILO Security Switch

 
SOLVED
Go to solution
Sean_195
Occasional Contributor

ILO Security Switch

Is there any way of changing the security switch for ilo through software ?
3 REPLIES 3
David Claypool
Honored Contributor
Solution

Re: ILO Security Switch

No, it's a physical switch, not a "soft" one. If you have access to the OS and are trying to reset security on your iLO, you can use HPONCFG to change the configuration.
Sean_195
Occasional Contributor

Re: ILO Security Switch

Hi David
Thanks for the feedback , sorry to sound dumb but i have only just started using ilo.
How would i configre it with hponcfg ?
David Claypool
Honored Contributor

Re: ILO Security Switch

http://www.hp.com/go/ilo --> More iLO3 Documentation --> "HP ProLiant Integrated Lights-Out 3 v 1.05 Scripting and Command Line Guide"

Page 8:

"For Windows server operating systems, there is also the HPONCFG_GUI.EXE. This tool provides the same basic configuration capabilities as found in the iLO 3 F8 ROM-Based Setup Utility (RBSU) during the server boot up process.

Version 3.0 of this utility is required for use with iLO 3and is backwards compatible with iLO 2 and iLO."