Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Server Management - Remote Server Management
Showing results for 
Search instead for 
Did you mean: 

ILO configuration Issue on HP DL 385 G1 & DL 385 G5

Occasional Advisor

ILO configuration Issue on HP DL 385 G1 & DL 385 G5

I had ran the HPONCGF.exe utility on both blade server.After standard configuration setting such as IP etc on server,I got error message as follows:
" Managing processor is busy".
I did ILO Hardware check and also changer the "Security override S/w on mothermoard'.
Still getting the same error.
Please suggest for resolving the problem and configuring ILO on HP DL 385 G1 & DL 385 G5.

pratap m keshava
Trusted Contributor

Re: ILO configuration Issue on HP DL 385 G1 & DL 385 G5

You can try to restart the iLO driver on the system and check if you still face the same problem. If this fails, You may have to remove power cable from the server (not just rebooting) and insert back. While server is booting, check for any message related to iLO in server console.