Server Management - Remote Server Management
cancel
Showing results for 
Search instead for 
Did you mean: 

ILO connectivity

Derrick G Smith
Occasional Visitor

ILO connectivity

All of the sudden we started getting this message on our insight display.

"The network connectivity of ILO is impaired. This could be due to bad gateway, DNS or netmask info. It could take up to 3 minutes for devices to gain connectivity after insertion."

It's only on one of our 9 blades. It's a BL460C running Windows Server 2008 Enterprise x64 SP2 with 8GB of ram. Our enclosure is an HPC7000. The ILO2 is running firmware 1.81. We have another blade running the same configuration exactly and it is fine. Any ideas? Thanks.
4 REPLIES
Server Messaging Suppor
Frequent Visitor

Re: ILO connectivity

Did you ever find a resolution? We are having the same issue on a few of our enclosures,

JVenables
Occasional Advisor

Re: ILO connectivity

I have the above message on a couple of our blades this has only just started happening....Does anyone know what this issue is...Its only happening on the ILO of 1 blade out of 16 on that enclosure

Oscar A. Perez
Honored Contributor

Re: ILO connectivity

What is your iLO2 firmware version? OA firmware version?




__________________________________________________
If you feel this was helpful please click the KUDOS! thumb below!