Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Server Management - Remote Server Management
Showing results for 
Search instead for 
Did you mean: 

ILO2 No video when start Windows grafical

Carlos Clerigo
Occasional Visitor

ILO2 No video when start Windows grafical

We have a problem with a ILO2 a BL460c. When the start screen graphical windows, I get a message that no video. If we started in VGA mode if we have video, but could not detect mouse.
Do you now what is the problem?.
Honored Contributor

Re: ILO2 No video when start Windows grafical

Here are some things to check:

Are you using current iLO 2 firmware?
Are you using iLO remote console or IRC to access the console?
Check the iLO event logs for any errors.
Make sure the server is ON.

Verify you are remotely accesssing the server you believe you are administering. You can use the UID control to confirm this.