ILO2

[Simple User]

Hi,

Iv got DL360/DL380's on my hand with ilo advanced pack, everything works fine except for one thing, cant get ilo time correct, is there any way to sync it with ntp ?

iLO 2 Firmware Version: 1.50 03/12/2008
and now it shows something like:

iLO 2 Date/Time: 02/04/2008 04:04:32

wbr

[barnett chan]

iLO does not support ntp at this time. iLO gets time from system and Agents.

[Simple User]

well system time is correct:

system time set with hwclock (in linux)
-------------------------------------------
#hwclock --systohc --debug
-------------------------------------------
...
Time read from Hardware Clock: 2008/07/26 14:49:27
Hw clock time : 2008/07/26 14:49:27 = 1217072967 seconds since 1969
Time elapsed since reference time has been 0.000995 seconds.
Delaying further to reach the next full second.
Setting Hardware Clock to 17:49:28 = 1217083768 seconds since 1969
ioctl(RTC_SET_TIME) was successful.
...
----------------------------------------

and in the same time boxes ilo has wrong time.

iLO 2 Date/Time: 02/04/2008 20:19:46

PS

by Agents You meant Insight Manager ?

[M.S.Srivatsa]

Agents here refer to the agents installed on the Host server.
1.Windows
HP Insight Management Agents for Windows 2003/2008
---> http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=3646113&prodNameId=3646114&swEnvOID=1005&swLang=8&mode=2&taskId=135&swItem=MTX-ed4b332887f945a383fe2b06e7
2.Linux
HP SNMP Agents for Red Hat Enterprise Linux 4 (AMD64/EM64T)
---> http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=3646113&prodNameId=3646114&swEnvOID=2026&swLang=8&mode=2&taskId=135&swItem=MTX-cf9fbeed097b48e8826769a66c

[David Claypool]

You need the 'hprsm' package installed for this to work. Check

rpm -qa | grep hprsm

[BOYAN BIANDOV]

Not true; iLO2 doesnt; begginign with iLO3 NTP is supported; the support does appear to continue with iLO4 as well