Server Management - Remote Server Management
cancel
Showing results for 
Search instead for 
Did you mean: 

ILO3 and SNMP

 
testmado662
Frequent Advisor

ILO3 and SNMP

Hello,


I don't know how to configure ILO3 SNMP in order to entered V2 public and access to my monitoring server.
ILO can't connect to monitoring server and I've installed ILO3 latest version.
MIB walker don't work too. OS is an Hypervisor and I can't configure SNMP from OS like Windows Server.

Is there a release note about that issue ?


Regards

 

1 - Copie.JPG

 

2 REPLIES 2
KK
HPE Pro

Re: ILO3 and SNMP

Hi,

From the images shared in your post, the iLO SNMP seems to be configured correctly.

For getting the trap/ alert or running MIB walker, use the community string as - public and it should work properly.

For the Hypervisor OS - VMware ESXi, HPE does not provide any SNMP based management agents, instead use the offline bundle which contains SMX provider based on CIMOM.

Regards,

KK

I am an HPE Employee


Accept or Kudo
testmado662
Frequent Advisor

Re: ILO3 and SNMP

Hello,

But I don't where I could declare public for SNMP V2. Without Public, ILO can connect to monitoring server.

Thanks