ILO3 sysrq on virtual serial port

[bernhard_f]

Hi,

I wonder if someone managed to send a sysrq via vsp to a ILO3 managed linux machine, the corresponding ttyS0 (in our case) is defined as primary console in grub.conf

In ILO2 this was possible with ESC+CTRL+B plus the key need "h" for help.

thanks,

bernhard_f

[Abhishek Bangalore]

Hello,

In order to check the commands for the ILO3 Please refer the link:

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c02063192/c02063192.pdf

You will be able to check all require details.

In order to check more details refer this one:

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c02063196/c02063196.pdf

Regards 

Abhishek

[Michael Leu]

Integrated Lights-Out 3 Virtual Serial Port configuration and operation HOWTO is not very helpful, it only states "iLO firmware version 1.1x supports Linux SysRq commands using the VSP" but the actual key sequence seems to be missing from this doc.

[Oscar A. Perez]

What iLO3 firmware do you have? I'm told that the SysRq support was added in version 1.20. 

[Michael Leu]

"ESC CTRL+b h" works for me with iLO3 1.26.

Oscar, could you perhaps update the documentation? I did not find the key sequence described anywhere in the VSP HOWTO... Thanks.

[Oscar A. Perez]

Done.