Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
Server Management - Remote Server Management
cancel
Showing results for 
Search instead for 
Did you mean: 

ILO3 sysrq on virtual serial port

bernhard_f
Occasional Contributor

ILO3 sysrq on virtual serial port

Hi,


I wonder if someone managed to send a sysrq via vsp to a ILO3 managed linux machine, the corresponding ttyS0 (in our case) is defined as primary console in grub.conf

 

In ILO2 this was possible with ESC+CTRL+B plus the key need "h" for help.

 

thanks,

bernhard_f

 

5 REPLIES

Re: ILO3 sysrq on virtual serial port

Hello,

 

In order to check the commands for the ILO3 Please refer the link:

 

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c02063192/c02063192.pdf

 

You will be able to check all require details.

 

In order to check more details refer this one:

 

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c02063196/c02063196.pdf

 

Regards 

Abhishek

Help other's for Better Tomorrow

I am an HP Employee
Michael Leu
Honored Contributor

Re: ILO3 sysrq on virtual serial port

Integrated Lights-Out 3 Virtual Serial Port configuration and operation HOWTO is not very helpful, it only states "iLO firmware version 1.1x supports Linux SysRq commands using the VSP" but the actual key sequence seems to be missing from this doc.

Oscar A. Perez
Honored Contributor

Re: ILO3 sysrq on virtual serial port

What iLO3 firmware do you have? I'm told that the SysRq support was added in version 1.20. 




__________________________________________________
If you feel this was helpful please click the KUDOS! thumb below!
Michael Leu
Honored Contributor

Re: ILO3 sysrq on virtual serial port

"ESC CTRL+b h" works for me with iLO3 1.26.

 

Oscar, could you perhaps update the documentation? I did not find the key sequence described anywhere in the VSP HOWTO... Thanks.

Oscar A. Perez
Honored Contributor

Re: ILO3 sysrq on virtual serial port

Done.



__________________________________________________
If you feel this was helpful please click the KUDOS! thumb below!