Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Server Management - Remote Server Management
cancel
Showing results for 
Search instead for 
Did you mean: 

ILO3 will not boot my system

TC_Ray
Occasional Contributor

ILO3 will not boot my system

I have a new Dl360 G7 with ILO3 (FW 1.10) I have the advanced licence installed on ILO, Had a power outage recently and cannot boot server using ILO3 power management, have tried several times since and it will not remotely boot the server. Pressing the power buttons results in nothing. Can anyone help.
3 REPLIES
Jan Soska
Honored Contributor

Re: ILO3 will not boot my system

hello,
try:
1) dosconnect power cables from server for a while
2) update ILO3 firmware to latest 1.15 version
3) try again power up.

Jan
Jimmy Vance
HPE Pro

Re: ILO3 will not boot my system

Are you sure your waiting long enough? G7 servers take longer to boot than older ProLiant. I've seen them take up to 2 minutes before you get video



__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!   
barnett chan
Trusted Contributor

Re: ILO3 will not boot my system

Does CLP work? ssh into iLO, then execute 'Power on' without the quotes.