Server Management - Remote Server Management
1745853 Members
4536 Online
108723 Solutions
New Discussion

Ilo 2 setup with 2008 R2 AD

 
jstuer
Advisor

Ilo 2 setup with 2008 R2 AD

I am new to iLO.  I believe I have everything setup correctly, but when I run the test settings, I get user object not found.  I used these instructions http://www.techietips.net/Configure-Windows-ADS-Authentication-for-HP-iLO-2-card  to get iLO setup.

 

Any help is greatly appreciated!

3 REPLIES 3
Oscar A. Perez
Honored Contributor

Re: Ilo 2 setup with 2008 R2 AD

Please post your test results here, if you can.




__________________________________________________
If you feel this was helpful please click the KUDOS! thumb below!
jstuer
Advisor

Re: Ilo 2 setup with 2008 R2 AD

Test Log Initiating Directory Settings diagnostic for server server.domain.com Directory Server address server.doamin.com resolved to x.x.x.x Accepting Directory Server certificate for /CN=server.domain.com signed by /DC=com/DC=domain/CN=domain-server-CA Unable to authenticate test user testuser [User Object not found] Ceasing tests. Some diagnostics FAILED for server server.domain.com  

jstuer
Advisor

Re: Ilo 2 setup with 2008 R2 AD

I got this working with HPSIM SSO.