HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Remote Server Management
cancel
Showing results for 
Search instead for 
Did you mean: 

Integrated Lights-Out Advanced - Evaluation License

 
daniemal002
Occasional Advisor

Integrated Lights-Out Advanced - Evaluation License

Downloaded the evaluation keys for ILO2 for ProLiant ML350 G6. But when trying to install them it fails. Can anyone please assist me with a solution. Please see screen shot attached
3 REPLIES
Matti_Kurkela
Honored Contributor

Re: Integrated Lights-Out Advanced - Evaluation License

It says one of the possible reasons is "Updated iLO 2 firmware is required to support this key."

So, what is your iLO2 firmware version?
If it isn't the latest, upgrade it, then try installing the evaluation key again.

If another evaluation key was already used in this server, then another of the listed reasons may be applicable: "The evaluation period is expired and evaluation licenses are no longer accepted." In that case, you must buy a permanent license if you want to use the advanced features.

MK
MK
daniemal002
Occasional Advisor

Re: Integrated Lights-Out Advanced - Evaluation License

Hi

I have updated it to the latest firmware level which is V.2.05(12/16/2010). Could it be that the evaluation key already expired ?

Regards

Danie
daniemal002
Occasional Advisor

Re: Integrated Lights-Out Advanced - Evaluation License

Data and time was incorrect on the server once this was changed ILO evaluation keys was working