Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Server Management - Remote Server Management
Showing results for 
Search instead for 
Did you mean: 

Integrated Lights Out Passthrough Install Failure

Rachael M
Occasional Visitor

Integrated Lights Out Passthrough Install Failure

I downloaded the Lights-Out Passthrough Service software. When I run the Application (hplopts.exe), it errors out. "Cannot start service from the command line or a debugger. A Windows Service must first be installed (using installutil.exe) and then started with the ServerExplorer, Windows Services Administrative tool or the NET START command." I tried searching for this installutil.exe software to download, but can not find it.
David Claypool
Honored Contributor

Re: Integrated Lights Out Passthrough Install Failure


The current component pack of the iLO Passthrough Service is cp07077.exe which when extracted has 4 files:

cp007077.xml (a description of the package)

There is a pre-requisite of the .NET Framework and the iLO driver before installation. Start the install with cpqsetup.exe and it will deliver the bits and install the service. Simple as that.

This is to be installed on the server with the iLO that you want the passthrough to operate on. This is not for the client machine.

You additionally will need to enable its operation in the iLO user interface.