Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Server Management - Remote Server Management
cancel
Showing results for 
Search instead for 
Did you mean: 

LILO deaktivied

HaPEZe
Occasional Contributor

LILO deaktivied

Hallo
I have a DL585 G1 Server, when I boot the
server, I don't get the possibility to aktive
the LILO. On the screen I get the message "Lilo is deaktivied". How is the way to aktive the Lilo. At the server I have the Lilo port and I have a active physically layer on the port.
Thanks for every Hint
Regards
Hans-Peter
2 REPLIES
Blazhev_1
Honored Contributor

Re: LILO deaktivied

Hi,

1 option is to use the system maintenace switch in the systemboard, set position 1 to on and start the server. This can work.

If this is not the case, unplug the power cable, wait some time and plug it in again.
This will completely reset the iLO and it should show up.

Pac
HaPEZe
Occasional Contributor

Re: LILO deaktivied

Thank you is't works
Regards HaPe