Server Management - Remote Server Management
1748165 Members
3926 Online
108758 Solutions
New Discussion

ILO 4 Configuration is temporarily unavailable, All the Hard Disk drives predictive failure

 
Waseem-HP
Advisor

ILO 4 Configuration is temporarily unavailable, All the Hard Disk drives predictive failure

HPE Proliant DL 380p Gen8 was working fine till last week, last weekend saw all 4 SAS Hard Drives with alarm "Predictive Failure soon" Temperature 70C Max. 90c for all HDDs. Restarted server but no change.

Done Storage array Firmware upgrade, 

Tried to check through ILO but iLO isn't working, coming with below message:
1500 iLO 4 Configuration is temporarily unavailable(5), System Health Monitoring has been disabled

BIOS ROM Firmware upgrade failed with message "ilo channel interface driver"

Windows Server 2012 R2 (OS) is there, Server is working fine.

How to resolve this issue? any way to make online?

 

2 REPLIES 2
slavtechbuer
Valued Contributor

Re: ILO 4 Configuration is temporarily unavailable, All the Hard Disk drives predictive failure

Hi there, 

Can you still log into ILO remotely? 

If you can please try to upgrade ILO firmware to 2.61 

You might need to perform NAND format. 

Thanks

Slav

Waseem-HP
Advisor

Re: ILO 4 Configuration is temporarily unavailable, All the Hard Disk drives predictive failure

I cannot log in remotely to the ILO. 

I can ping the ILO IP but while booting the server its not showing up IP Address.

I installed ILO Utility for Windows, and its showing " ILO Unavailable"