NIC & ILO share

[arbsj7]

How do i share NIC & ilo ?

[James ~ Happy Dude]

Hello there !(again!)

Which server are you referring to ?

U can use iLO SSH, BIOS or XML Scripts to get it done.

SSH and telnet used over the Shared Network Port. Both of these features can be enabled or disabled in iLO configuration,

Regards,
James.

[arbsj7]

hey Yaar ...

Where in India are u from? U still awake?
How can that be done? please explain.
any documents that i can read/

[KarloChacon · Accepted solution]

hi

yes which server or at least which ilo version?

ilo 2 for example you can enable it on
-> Administration Tab -> Network -> Share network Port

regards

[James ~ Happy Dude]

Hello,

I'm from Bangalore ;-)

You did not mention the server model.

This can be achieved in the Following servers with Minimum iLO firmware version(beside)
DL320G3 1.64
DL360 G4 1.60
DL360 G4 1.64
DL380 G4 1.60
DL385 G1 1.64
DL580 G3 1.64
ML370 G4 1.60
ML570 G3 1.64

Only the iLO Shared Network Port or the iLO Dedicated Management NIC port can be used for iLO server management at one time. The iLO Shared Network Port and the iLO Dedicated Management NIC port cannot operate simultaneously. Enabling the dedicated iLO NIC disables the iLO Shared Network
Port, and enabling the iLO Shared Network Port disables the dedicated iLO NIC.
Disabling the Shared Network Port does not completely disable the system NIC. Regular network traffic still passes through the system NIC. When the Shared Network Port network traffic is disabled any traffic
going to or originating from iLO is not passed on to iLO through the shared Network Port because the port is no longer shared with iLO.

Regards,
James.

[arbsj7]

I am using Dl320 G3

[arbsj7]

hmm... I see.
Thanks; I am very new to this; is there a Document i can read/

[James ~ Happy Dude]

Hello,

You can refer:

h20000.www2.hp.com/bc/docs/support/SupportManual/c00553302/c00553302.pdf
for iLO2

&
h20000.www2.hp.com/bc/docs/support/SupportManual/c00209014/c00209014.pdf
for iLO

Regards,
James.

[KarloChacon]

yes the DL320 G3 support that


"Support for new iLO Shared Network Port enables access to the iLO management processor through one of the embedded system NICs"


just try to have the latest firmware for the ilo
http://h18023.www1.hp.com/support/files/server/us/download/27327.html

a document about ilo
here it is, page 40
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00209014/c00209014.pdf


regards

[James ~ Happy Dude]

Hello,
You can get a better Idea in the iLO user guide, page 44 onwards.

Regards,
James.