Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
Server Management - Remote Server Management
cancel
Showing results for 
Search instead for 
Did you mean: 

NVRAM write/read/verify

SOLVED
Go to solution
catmandu100
Occasional Visitor

NVRAM write/read/verify

On the HP System Management Homepage on a Domain Controller, the NVRAM write/read/verify test on the RILOE (part of the self-test) has failed.
I see elsewhere on this forum that it can be caused by firmware upgrades, however my firmware has not been upgraded (version 1.21)

Any idea if shutting down the DC and removing the RILOE power before restarting is an effective fix-all for this issue? It's not easy for my customer to arrange this so I want to be sure it works before suggesting it. Or any better solutions?
4 REPLIES
TimeOut
Occasional Advisor

Re: NVRAM write/read/verify

I believe you just need to reboot RILOE.

Log in to RILOE webpage, go to Network settings and without doing any change to the settings, press "Apply" button. RILOE will reboot after that.
acartes
Honored Contributor
Solution

Re: NVRAM write/read/verify

Updating the RILOE firmware will also result in a reset.
catmandu100
Occasional Visitor

Re: NVRAM write/read/verify

Seems that the firmware I have is the latest version already.
catmandu100
Occasional Visitor

Re: NVRAM write/read/verify

1. Checked firmware - it was up to date
2. Reset RILOE on Management Homepage - no success
3. Reinstalled firmware - error was solved.