Server Management - Remote Server Management
1748054 Members
4961 Online
108758 Solutions
New Discussion юеВ

Re: Need to reset ILO password.

 
yugao
Occasional Advisor

Need to reset ILO password.

I have a server at a remote site that the OS puked, so I can't use Terminal Service to connect the server. The ILO's password was was the default factory password which I don't know.

I dl cpqlocfg and xml files to reset or add another user to the ILO, but they all require the original Administrator password. Any idea? Can you provide the command line format if possible? Thanks.
4 REPLIES 4
Rajeshwari, Hiresave
Trusted Contributor

Re: Need to reset ILO password.

To access the iLO, we need to have atleast one of the following ...
1. Access to iLO (username and password).
2. Root access to the Host OS.
3. Physical access to the machine.
4. iLO security disabled.

Without having any of the above, you will not be able to access the management processor. This will be required for security reasons.
Doug Wolff
New Member

Re: Need to reset ILO password.

For Me:
Shut down the server.
Opened the server case and looked for the ilO security switch and disable it. Turn on the server and press F8 for iLO configuration. Set a new password, turn off the server, reset the security switch, and turned the server back on. Now the password is what I set it to and not the unknown password. Hope I did not miss a step
cisco sysadmin
New Member

Re: Need to reset ILO password.

ramesh_naik_
Esteemed Contributor

Re: Need to reset ILO password.

Hi Yugao,

You may want to check this in case you have not:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1053974

Regards,
rmn