Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
Server Management - Remote Server Management
cancel
Showing results for 
Search instead for 
Did you mean: 

No PCI-E information in iLO Device Inventory

ReneSchell
Occasional Contributor

No PCI-E information in iLO Device Inventory

Hi there,

as you can see in the attached image, there aren't any information about the storage controller for the IO Accelerators PCI-E cards.

What do we need to do to get these information?

1 REPLY
Oscar A. Perez
Honored Contributor

Re: No PCI-E information in iLO Device Inventory

iLO4 gets the server hardware Inventory from the System ROM and this exchange of data only happens during POST.  Be sure the server is powered ON and POST has completed (server has already booted to the OS).

Also, most devices require the Agentless Management Service (HP AMS) to be running on the OS side, in order for iLO4 to monitor their status. Refer to this document for more information:

https://www.hpe.com/h20195/v2/getpdf.aspx/4AA6-6053ENW.pdf?ver=1.0

 

 




__________________________________________________
If you feel this was helpful please click the KUDOS! thumb below!