Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Server Management - Remote Server Management
cancel
Showing results for 
Search instead for 
Did you mean: 

Problem on LO100 (shared port of a DL180 G6) connecting to a Cisco switch via Gbic module

SOLVED
Go to solution
ehuang
Super Advisor

Problem on LO100 (shared port of a DL180 G6) connecting to a Cisco switch via Gbic module

Hi folks, I just want to have a firm answer to this.

 

Recently we have used a Gbic module to connect our Cisco switch in hope to get a better performance. But it seems like if we power off the server, we lose the LO100 connection. Is that because LO100 shared port only supports 100Mps LAN and won't be detected by Gbic? It is a remote server, so I can't really get my hands on it for some simply test. 

 

Thank you in advance.

1 REPLY
ehuang
Super Advisor
Solution

Re: Problem on LO100 (shared port of a DL180 G6) connecting to a Cisco switch via Gbic module

I have tested it. The LO100i port only supports 10mbps.