Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
Server Management - Remote Server Management
cancel
Showing results for 
Search instead for 
Did you mean: 

RILOEII in non-Proliants

Scott_278
Valued Contributor

RILOEII in non-Proliants

I seem to be having difficulty with some RILOEII cards in TC4100s. The web interface stops responding, though I can still ping the IP address. The only resolution I have found is to power off both the server and the RIB card. After that, they both respond for a week or two before it happens all over again.

Firmware is 1.16. CPQLOCFG is not able to elicit any response from the RIB either. Telnet does not produce any output at all.
2 REPLIES
M.S.Srivatsa
Valued Contributor

Re: RILOEII in non-Proliants

How many no.of browser sessions opened when this problem happened?

Also is CPQLOCFG executed from a batch file
for a long time?

Scott_278
Valued Contributor

Re: RILOEII in non-Proliants

I have upgraded to firmware 1.20, but the problem persists. There are no browser sessions open while I attempt to connect.

I am generally using CPQLOCFG from the command line, but I have the two methods interchangeably.