Reset ILO password in RHEL 5.2, 64 bit server + HPONCFG utility

[WW576216]

Hi,

I am trying to reset the ILO password in RHEL 5.2, 64 bit server. I installed hponcfg-3.1.1-0.noarch.rpm & rpm -ivh hpasm-7.9.0-116.rhel5.x86_64.rpm sucessfully, but i am gettig error while installing hprsm-7.9.0-108.rhel5.x86_64.rpm,

FYI,

-bash-3.2# rpm -ivh hprsm-7.9.0-108.rhel5.x86_64.rpm
Preparing... ########################################### [100%]
1:hprsm ########################################### [100%]
Please read the License Agreement for this software at



/opt/compaq/hprsm/hprsm.license



By not removing this package, you are accepting the terms
of the "License for HP Value Added Software".
Building custom cpqci driver
Failed to rebuild for custom kernel.
No Insight Management devices available
(missing or disabled) on this system.
Please remove the hprsm package at your
earliest convenience (rpm -e hprsm).



==============================================================================
NOTE: New cma.conf entries were added to the top of /opt/compaq/cma.conf
==============================================================================
Starting HP Lights-Out Drivers and Agents (hprsm):



The hprsm RPM installation failed!
Installation failure may be due to incomplete or missing
build environment or to absent hardware (RILOE/RILOE II,
iLo/iLo 2). Please refer to the installation notes or to the
Linux Management HowTo available from http://www.hp.com/linux.
error: %post(hprsm-7.9.0-108.rhel5.x86_64) scriptlet failed, exit status 1

Please help me on this otherwise please let me know the procedure to reset the ILO password.

Thanks&Regards,
Rajkumar.P
91-9894864241

[Jimmy Vance]

knowing what server model your working with might help