Server Management - Remote Server Management
1748184 Members
3890 Online
108759 Solutions
New Discussion юеВ

Re: Reset front ILO Port BL20p

 
Jon_183
New Member

Reset front ILO Port BL20p

I am trying to reconfigure the ILO via the front port. I am using 192.168.2.1 (my address) to connect to 192.168.1.1(IL0). It wont connect. I believe someone has change the IP of the ILO previously. Is there a way to reset the blade to it's factory default? Should the front ILO port always be able to be reached at 192.168.1.1?

Thanks,
4 REPLIES 4
Jeff Allen_5
Valued Contributor

Re: Reset front ILO Port BL20p

Your address needs to be 192.168.1.2 - not 2.1
Rula
New Member

Re: Reset front ILO Port BL20p

Hi
I configured the laptop with IP 192.168.1.2 and connected to the server . I try to go to the address IE to 192.168.1.1, but nothing happens....
Paula Clarke
New Member

Re: Reset front ILO Port BL20p

Did anyone resolve this one?
acartes
Honored Contributor

Re: Reset front ILO Port BL20p

If the iLO front port IP address is unknown, then you should use iLO ROM-Based Setup Utility to set it to a known value.

Connect video and keyboard, reboot the host, and enter iLO RBSU using the local controls.