Reset front ILO Port BL20p

[Jon_183]

I am trying to reconfigure the ILO via the front port. I am using 192.168.2.1 (my address) to connect to 192.168.1.1(IL0). It wont connect. I believe someone has change the IP of the ILO previously. Is there a way to reset the blade to it's factory default? Should the front ILO port always be able to be reached at 192.168.1.1?

Thanks,

[Jeff Allen_5]

Your address needs to be 192.168.1.2 - not 2.1

[Rula]

Hi
I configured the laptop with IP 192.168.1.2 and connected to the server . I try to go to the address IE to 192.168.1.1, but nothing happens....

[Paula Clarke]

Did anyone resolve this one?

[acartes]

If the iLO front port IP address is unknown, then you should use iLO ROM-Based Setup Utility to set it to a known value.

Connect video and keyboard, reboot the host, and enter iLO RBSU using the local controls.