Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
Server Management - Remote Server Management
cancel
Showing results for 
Search instead for 
Did you mean: 

Riloe II - How to reset Card

Wildatom
Occasional Visitor

Riloe II - How to reset Card

Issue: I can't talk to the card with HPONCFG, and locked out by not knowing the password when pressing F8.

Help Wanted: How can I reset the card physically? Is there a jumper or something on the Riloe ii?
3 REPLIES
acartes
Honored Contributor

Re: Riloe II - How to reset Card

Confused: RILOE II does not have an F8 password. It does have tha ability to hide the F8 prompt.

What is the nature of the problem with HPONCFG? This normally would be a good way to work this issue.

Are you sure this is RILOE II or is this iLO? In iLO systems, there is an "iLO Security Override Switch" documented on the hood sticker. With power removed, set this switch, and then power up. You will have full access to all iLO configuration then. Make sure you power-off then restore the switch when you are done.
pratap m keshava
Trusted Contributor

Re: Riloe II - How to reset Card

If it is RILOE II, you can set both jumper 3 and 4 in SW2 as shown in the figure attached. This will reset the RILOE II to factory default.
Wildatom
Occasional Visitor

Re: Riloe II - How to reset Card

Thank You, just what I was looking for.