HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Remote Server Management
cancel
Showing results for 
Search instead for 
Did you mean: 

SNMP Monitoring of PCI cards and Serial Ports on ProLiant Gen9 Servers

 
DaveBBell84
Occasional Visitor

SNMP Monitoring of PCI cards and Serial Ports on ProLiant Gen9 Servers

G'day,

 

I'm in the process of learning how SNMP monitoring works and setting it up for a couple of DL380's and a DL360 server.

I've setup the iLOv4's and I have PRTG running. I've already setup a number of SNMP items which are being successfully monitored.

My question is, is there any monitoring I can setup for the serial ports on the servers or for PCI cards that are installed in them?

I have some devices connected to the serial ports and would like to known things like if data flow stops, if there is a fault with the comm port, etc.

I also have a PCI card installed in one of the servers which is receiving video along with some other signals and it would be good to know if a fault occurs with the card.

 

Cheers

Dave

2 REPLIES
DKadmin
Occasional Visitor

Re: SNMP Monitoring of PCI cards and Serial Ports on ProLiant Gen9 Servers

Hi Dave

Any luck with this? I have the same problem.

I want to be notified if one of the ports is down on my PCI card.

Thanks 

DaveBBell84
Occasional Visitor

Re: SNMP Monitoring of PCI cards and Serial Ports on ProLiant Gen9 Servers

Unfortunately, I haven't received any replies to this.