Server Management - Remote Server Management
cancel
Showing results for 
Search instead for 
Did you mean: 

Smash CLP configuration of SSO Certificate

AntsInPants
Frequent Advisor

Smash CLP configuration of SSO Certificate

Hi,

I am trying to configure a DL 380 G7 through SSH access to trust my HP SIM server with a Certificate. The ILO Scripting manual for v3 fw 1.20 states that

To dynamically import a certificate from the specified server (hpsim2.corp.net):
hpiLO-> load = hpsim2.corp.net


However, with my experiment and looking at the LOAD command help output it is quite clear that this command can only be used to Download a new Firmware .bin file over HTTP/HTTPS protocol.

I am ofcourse in the correct target (/map1/oemhp_ssocfg1/) when trying it out.
Is there an error in the manuals or am I using it incorrectly?

Any tips are welcome,
Antti
3 REPLIES
Oscar A. Perez
Honored Contributor

Re: Smash CLP configuration of SSO Certificate

It doesn't seem to work. Can you use the webGUI to set the the SSO and import the certificate instead?



__________________________________________________
If you feel this was helpful please click the KUDOS! thumb below!
AntsInPants
Frequent Advisor

Re: Smash CLP configuration of SSO Certificate

Hi,

yes the web gui is working as expected but is not how I want to configure multiple machines. Any other mass deployment methods would also be welcome?
Oscar A. Perez
Honored Contributor

Re: Smash CLP configuration of SSO Certificate