Server Management - Remote Server Management

Re: Update iLO Amplifier from 1.81 to 1.90 - Issues

 
SOLVED
Go to solution
Birchi
Advisor

Update iLO Amplifier from 1.81 to 1.90 - Issues

After updating from v1.81 to 1.90 ...

  • no servers are visible anymore.
  • CPU is between 50% and 100%.
  • General Settings: Failed to load performance settings
  • Reports: Failed to Download Report
11 REPLIES 11
Suman_1978
HPE Pro

Re: Update iLO Amplifier from 1.81 to 1.90 - Issues

Hi,

First things first, have you checked the compatibility?
https://support.hpe.com/hpesc/public/docDisplay?docId=c05384819

Thank You!
https://support.hpe.com/hpesc/public/home


I work for HPE

Accept or Kudo

Birchi
Advisor

Re: Update iLO Amplifier from 1.81 to 1.90 - Issues

Hi Suman_1978

The amplifier has updated itself automatically. For this reason I trust HPE that the compatibility is OK.

Kind Regards

birchi

Zimo
Occasional Advisor

Re: Update iLO Amplifier from 1.81 to 1.90 - Issues

We experiencing exactly the same problems and compability is ok.

Br,

Simo

Sven_Probst
Established Member

Re: Update iLO Amplifier from 1.81 to 1.90 - Issues

Same problem here, after rebooting the virtual-appliance you can see it is adding the devices. After a few minutes (counting up 300 added servers and more)  it just display "0 Server" and the cpu-usage is about 100% after that point.

jprabhak
HPE Pro

Re: Update iLO Amplifier from 1.81 to 1.90 - Issues

I would suggest to raise a support case 

regards

JP
I work for HPE
Birchi
Advisor

Re: Update iLO Amplifier from 1.81 to 1.90 - Issues

HPE Support case 5355494764 has been created

sudhirsingh
HPE Pro

Re: Update iLO Amplifier from 1.81 to 1.90 - Issues

Hi,

 

High CPU utilization has been fixed in 1.81, check if it can be redeployed and add server again.

https://support.hpe.com/hpesc/public/docDisplay?docId=a00112065en_us&docLocale=en_US

 

 

Regards,

Sudhir

While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company

>Accept or Kudo

Zimo
Occasional Advisor

Re: Update iLO Amplifier from 1.81 to 1.90 - Issues

The high CPU was fixed in 1.81 but it came back in 1.90. At least for us too. And not only that, as mentioned earlier, right after reboot, it's running thru the servers but suddenly (after a few minutes) the number drops down to zero. I also created a case.

After loosing the whole inventory, trying to readd hundreds of servers to appliance running on 100% CPU, is not actually a solution in my mind.

Br,

Simo

Zimo
Occasional Advisor
Solution

Re: Update iLO Amplifier from 1.81 to 1.90 - Issues