Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Server Management - Remote Server Management
cancel
Showing results for 
Search instead for 
Did you mean: 

Upgrade ILO on HP Proliant DL380 G4

SOLVED
Go to solution
romain0412
Advisor

Upgrade ILO on HP Proliant DL380 G4

Hi,

I've some HP Proliant DL380 G4 with 2003 Server. I've also ILO card on this server. Their actual firmware is 1.82.

There is an less older version? I wan't to upgrade by webaccess.

The upgrade need a reboot of the server?

Where can I download the new image? Have you got an URL?

Thanks for your help,

Romain
3 REPLIES
Rajeshwari, Hiresave
Trusted Contributor
Solution

Re: Upgrade ILO on HP Proliant DL380 G4

Here is the link where you can go and download the firmware, drivers and software for iLO - http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=397991〈=en&cc=us&taskId=135&prodClassId=10007&prodTypeId=18964&prodSeriesId=397989

If you have a linux or windows OS installed, then you can download the Online ROM flash component for the respective OS and run it to update the firmware.

If you want to do the flash from the browser interface of iLO then .....
Download the online flash component (for w2k3 it is - http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18964&prodSeriesId=397989&prodNameId=397991&swEnvOID=1005&swLang=8&mode=2&taskId=135&swItem=MTX-6011807da53845899bda5311ba).
Execute the binary.
In the wecome screen press the button extract button.
Select a folder where you want to extract the files.
In the set of extracted files, you will find a .bin file. You can provide this file to the browser interface when you are trying to upgrade firmware through the web interface of iLO.
Jimmy Vance
HPE Pro

Re: Upgrade ILO on HP Proliant DL380 G4

I gave you the URL and how to extract the .bin file in another thread and you responded that you had it working. Are you still having problems?

http://forums13.itrc.hp.com/service/forums/questionanswer.do?threadId=1435259


The iLO firmware update does not require a server reboot, iLO reboots after the upgrade



__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!   
romain0412
Advisor

Re: Upgrade ILO on HP Proliant DL380 G4

The problem is resolved.

Thanks