HPE Community
Server Management - Remote Server Management
1751883 Members
5439 Online
108783 Solutions
New Discussion

VSP doesn't work anymore after upgrading to 1.79

 
Daniele Turani
New Member

‎09-21-2009 02:03 AM

‎09-21-2009 02:03 AM

VSP doesn't work anymore after upgrading to 1.79

Hi,
I just upgraded two DL360G5 to iLO v1.79 (one Red Hat 4 x86, one Red Hat 5 x86_64) and I can't use vsp anymore.

Here is what I got:
hpiLO-> vsp

Starting virtual serial port.
Press 'ESC (' to return to the CLI Session.

hpiLO-> Virtual Serial Port active: IO=0x02F8 INT=3

The console hangs on the last line, and I can't get to the login prompt anymore... useless to say, it worked perfectly with iLO 1.50 and older.
Any idea? Thanks in advance.
0 Kudos
Reply
1 REPLY 1
acartes
Honored Contributor

‎09-30-2009 07:34 AM

‎09-30-2009 07:34 AM

Re: VSP doesn't work anymore after upgrading to 1.79

Some fundamentals...

Check to make sure that the host is on.

Check the OS to make sure that there is a tty/getty bound to com1 (the I/O resources you list).

Did you use host RBSU to alter the serial port and/or EMS configuration?
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.